How do I Insert and Charge the Battery?
1. Remove the battery cover and align the battery contacts
with the terminals in the battery compartment as shown in the images below.
2. Push the battery down until it clicks into place.
3. Replace the battery cover over the battery compartment
and press down on the four corners of the battery cover until
it clicks into place.
Charging:
Your device comes with a charger. To charge, plug one end
of the charger into an electrical outlet and the other end
into the device’s MicroUSB port. Pay attention to the correct orientation.
Your Moxee Hotspot will indicate that charging is underway, and display a full battery indicator when charging is complete.
Related Articles
Getting Started on Moxee Tablet
Before getting started: Before first use, the battery should be charged completely. To charge the device: 1. Insert the USB Type C charging cable into the USB charger port. 2. Plug the charging head into the power outlet. 3. Remove charging cable ...How to install the Moxee Talk battery
With the back cover facing upright, slide the casing in a downward motion to remove the back cover. Once removed, insert the battery by aligning the metal contacts on the battery with the metal contacts in the battery compartment. Gently push down ...I forgot my hotspot password.
1. You can find the Wi-Fi Password in the Wi-Fi Info page on the LCD. 2. You can also reset the device to factory defaults by pressing the reset button for 5 seconds. *To find the reset button on your Hotspot, you must first remove the ...How to remove the backcover of m2160 moxee phone.
How to remove the backcover of m2160 moxee phone. The back cover of your phone is removable by lifting the corner with the notch in it. Look closely, one corner is meant for this action. Most times your fingernail is enough to pull it up, but ...How do I configure the settings of my mobile hotspot?
Logging into the WebUI 1. Make sure your hotspot is connected to the computer or other terminal via Wi-Fi or MicroUSB cable. 2. Open a browser on your computer or other connected device, and input http://192.168.1.1/ or http://device.webui/ into the ...