What do I do if I see my hotspot SSID but failed to connect?

What do I do if I see my hotspot SSID but failed to connect?

 1. Check if the password you entered is the correct one.
2. Check if WPS security is enabled on your PC. If so, check the device to see if it is expecting a WPS action from your PC.

    • Related Articles

    • How to set up your Wi-Fi connection, enable WPS

      Setting up Wi-Fi connection   1.   Press and hold the Power Button for 3 seconds until the welcome logo appears on the display. After a few seconds, the Wi-Fi signal icon will appear on the display. 2.   Look for the network {SSID) "Moxee ...

    • How do I login to my Moxee Hotspot / WebUI?

      To login and make administrative settings to your Moxee Hotspot, you must be connected via Wi-Fi to your Moxee Hotspot.  Open your browser and navigate to 192.168.1.1. A login prompt will appear The default username: admin and the password: 12$XXX ...

    • How do I configure the settings of my mobile hotspot?

      Logging into the WebUI 1. Make sure your hotspot is connected to the computer or other terminal via Wi-Fi or MicroUSB cable. 2. Open a browser on your computer or other connected device, and input http://192.168.1.1/ or http://device.webui/ into the ...

    • The connection sounds distorted / noisy on my Moxee Talk

      Sometimes the connection quality may be effected by certain conditions.  Here are some tips to try: 1.  If the device is close to another electrical appliance, try moving the Moxee Talk or the other appliance farther away and test again. 2.  Check ...

    • Troubleshooting Tips-connection failure, non-responsive, forgot password

      If you are having trouble with the device, here are a few trouble-shooting tips: 1. If the device is not responsive, restart it by pressing the "Power" button for about 3 seconds to show the "Reboot" selection, and then click it. Or press and hold ...