Setting up Wi-Fi connection

1.   Press and hold the Power Button for 3 seconds until the welcome logo appears on the display. After a few seconds, the Wi-Fi signal icon will appear on the display.

2.   Look for the network {SSID) "Moxee TetherXX_2.4G" or "Moxee TetherXX_SG", where XX are the last two digits of the device IMEI.

3.   Click "Connect" and enter the default password found on your device. Your Wi-Fi SSID and password can be found on your device's "Wi-Fi Info" screen or on the device label.

Setting up your WPS

If your terminal support WPS, you do not have to input the password manually once your WPS has been set up.

To use WPS please follow these steps:

1.  Enable WPS in the WebUI through Settings > WLAN > WPS.

2.   Click "Wi-Fi Info > Wi-Fi WPS" on the display.

3.   Click "Active" button to active WPS function.

4.   Enable the WPS function on your terminal to connect to the hotspot.